Tiny Tim's latest activity

I should’ve said I’ve loaded Hammers (Lever/Hunter) in several rifles over the years, just don’t have any experience with the Absolute...

Some guys in my range do their load work inside their trailers. I have no desire to do that. I have a pre-determined goal when I am at...

The 7 mag will respond well to the Absolute design. As in added velocity from the lower engraving pressure. The older inefficient...

You wouldn’t believe what I used for several years, when I was in my late teens, early 20’s…..once I upgraded , one shelf in a tiny...

It could be, it is a Savage. I should think you would notice this as you were fouling. How fast were you shooting? Seems odd that after...

What they said ^^^^^^^^. And you need a couple firings on your brass. Well Have Fun.

I don’t want to be that guy but this doesn’t mean anything. 100 yard groups are pretty worthless, especially without a chronograph.

Interestingly enough, all the lower shots were the first ones, next 2 seemed to all go higher. Maybe I need more than 8 foulers?

Wasting your time at 100 for that test. Ladder tests are for elevation differences, usually done at 300 minimum, but best at 600. Shoot...

There was a guy on one of the Seekins Facebook groups that 3D printed them.

Not sure about your reloading experience, but Hammer Hunters are similar to other mono's as far as burn rates and pressure testing, so...

Personally, I've found the regular Hammer Hunters to be easier to developed loads for than the HHTs and they allow more flexibility in...

Cerkote Elite Sand to match Manners Tac Swamp Custom Cerakote (S&W Red 85% w. Gold metallic 15%) to match Altus "Sedona" (copper and...

I can’t recall one ever getting away once hit! 😂 memtb