Texis's latest activity

I’d shoot one or the other. I have shot many rounds of 180 hybrids at near the same velocity, then shoot 10 monos, switch Back to...

Two things standout here, stock is not bedded in the recoil lug, bed it tight everywhere except underneath the lug. The rifle should be...

It’s not a light profile barrel, it’s a varmint profile. All of you guys have given me some areas to check on the rifle and things to...

I use a Whidden universal bushing for measuring at the ojive base to check the seating depth when loading. Very accurate setup, I...

Both 280ai barrels I’ve had have been picky about fouling and shoot best when cleaned then just fouled a little. My consistency goes...

I have an 8 twist 280ai and only shoot copper Hammer bullets and it doesn't foul quickly. Easiest barrel to clean actually. My guess is...

As I ponder the fouling, the fast 1:8 twist and 2900fps may be a quick fouling combination with Barnes monos. Shouldn’t a fast twist...

On my 700 the lug is bedded entirely in that area. Super tight fit. Its good to try different brands but if I was having any issues I...

And try another 1/10 gr powder to see if it stabilizes.

I’ll check the screws, lug position etc, clean the barrel and no commingle the monos. Thanks

If nothing else works bed the recoil lug. Easy and cheap.

My guess is its because its not bedded. Things are gonna move differently as the barrel heats up. Also check your 2 action screws make...

The 10 round dispersement group does give you a good view of overall performance, but if the 3 round spread is already 1.5” I’d be...

I guess we can split the cost for the magician 🤷🏻‍♂️

No the recoil lug is not bedded, the HS has an aluminum internal frame and the 700 to stock frame was blue fit.