Taylorbok's latest activity

Basically the same thing you're doing. Statistically 100 rounds isn't really enough to determine that the change you made actually had a...

height and cheek weld is relatively easy to deal with, bigger problem will be he's probably gonna be looking at the barrel through the...

I used to go hard on seating depth then I did some reading and watching also more testing to try and verify if it actually seemed to...

My last 30SM barrel shot the same load and seating depth from start to finish, groups never opened up. I wish I could remember how far...

Throat movement only matters if you are chasing the lands which IME is useless. Nor does seating depth make a difference on group size...

That makes sense except that in the video Cortina is sizing the brass before he seats his test bullets. The other note is that as...

I like trying different caliber as well, but I'm not too sure about the next one. I feel it is too small but I built one to see how it...

20" AR in .223 with 1:7 - 1:8 Twist shooting 65gr SGK. Not much pelt damage, DRT when hit, and you can get some 300-400 yd range no...

A magnetic parts tray has saved me from losing small parts like that multiple times.

I did some investigation after a roll pin mishap in my reloading room. If you reload like I so where you remove the ejector for setting...

When you zero at 100 yards, with most any high powered rifle, the "flat spot" in the trajectory is from about 85 to 115 yards. The...

We come up with it from physics and understanding of a concept called gravity...

Wrong-O, bucko..... 0 moa rail is as parallel to the bore, as the DD or ruger rings you jabber about.

0moa rails are parallel to the bore, it’s your sight in process that makes the scope hit where you want it to. Mathematically you’re...

I would like to point out an incorrect assumption you are working with. On a high powered rifle with a scope sighting system, zero'd...