Taylorbok's latest activity

When it gets back, measure and then call the sight company to see if it's feasible. Really a non banded sight would be much easier to...

Thanks for responding. I just switched to the Kuiu Pro bino harness so maybe I can find an option there. I agree that it needs to be...

IME seating the bullet deeper doesn't make any noticeable difference in pressure. Definitely not to the degree that's been described.

I've gone both ways. I recently did a seating depth test that had .180" difference total and there was no noticeable change in pressure...

If you had oil/solvent left in the chamber after cleaning, what you describe mirrors the results of what you saw. It is NOT high...

Yes, I picked one up on this site from a member here. Like new condition.

Tell him to separate the gun (incl scope) into a couple dumpsters and be done with that mess.

Someone make claw feet for that Hatch Bipod?

My point was something else is at play here. The seating depth isn't enough to cause this issue. The same as @MagnumManiac, I've gone...

Nope. Just did it to see if the BS about jamming a normal load from .010" off to .030" jammed did what was claimed. It did raise...

I no longer reply to these type of threads, but I will say, I have deliberately jammed bullets by .030” and never seen a rise in...

Like as in, if you were already way over charged seating the bullet deeper isn't going to fix that.

Do you have a regular vise? Does it have any type of thread locker (Rocksett, LocTite, etc.) on it? If you have a regular vise, you...

Ya, there's no way the seating depth change was the cause of that.