Taylorbok's latest activity

+ Less case stretch + Less frequent trimming. I trim my AI cases about every 7-8 firings vs every 3 for non-AI cases. + Less split...

I have the NON-ratcheting

Yes, that’s your extractor. Call Terminus and they will more than likely send you a new one. If I remember correctly there was a serial...

Yikes, I misread what I saw the first time on the item mentioned... I'm bad! Thanks for the correction... 🤪 Cheers PS; I won't do that...

15-25 in-lbs (NOT ft-lbs)

12.5ft/lbs is 150in/lbs. I don't know of any use that could be for rifle/scope work.

F-class John did a bunch of torque wrench videos on youtube. IIRC the Fix it sticks were the most accurate and consistent. I've been...

High humidity and wide varying temps are the killers of primers and powder. High temps are bad, as are really low temps. I have...

It’s carbon fiber. You’re looking for a problem that doesn’t exist

I think it's because Boots Obermeyer who was a high end barrel maker was in WI and trained several people to build barrels. Pretty sure...

A-tips have been used for many years as a hunting bullet. They tend to work similar to Berger VLD's or Hornady's ELD-X/M line of bullets.

I guess its faster than chambering a sized case but that would be true for all action types if loading to saami spec, most FL dies size...

IMO there is no need for a case gauge, provided you have calipers and a comparator set.

I may go to hell…..for this alone! memtb

Waiting till accuracy falls off seems to be a tad too late. I clean every session or two.