Taylorbok's latest activity

IMO that's bad advice. I vote for leave everything on and get the proper solution, ya it doesn't matter much at shorter distances but at...

if you click into Tgt (target) then scroll down two lines you should see Ideg (inclination degrees) + value is shooting up, - value is...

I think you are simply not comparing apples to apples here. I see the two units have different wind directions. Yours is R-wind, his is...

You should be able to put angle into kestrel

Do you use any ballistic apps as well as the kestrel? Reason I’m asking as I use a Hornady ballistic app in conjunction with my 5700...

By the time you get that bullet seated in that far you'll probably be farther ahead with something like a 338 Sherman Mag.

It would theoretically work, but far from optimal

That would probably be a single feed in just about any action shorter than 4", right? My .300RUM w. 215s and 230s were pushed way deep...

An Edge w/ 300 grain bullet seated to the neck/boat tail junction will be longer than a CIP mag.

Isn't a CIP mag going to be to short for an Edge? They're to short for my 7 RUM

I would wipe your kestrel, do any updates and start fresh, build a new profile. Don't upload that old one. See where that gets you

I prefer cut rifle barrels

That's not true. I'm really not sure where that myth ever came from. Anyone can look at the drawings on the SAAMI website. There's no...

there's nothing more precise about that chamber than any other chamber. I load a bullet in a case with a bit of lube on it and slam it...

Agree 100%. Was told by SIG if I replied to the Email same day I would have a new SIG 3K LRS in 5-7 days. If I were blessed to be lucky...