std7mag's latest activity

Wait.... So you mean that you aren't going to be selling me your entire collection for the agreed upon price?? 😉

4-12 or 4-16.

First issue I see is "factory ammo". Second, get another trigger, or IF you're comfortable with it, a set of Wolff Springs and minor...

A long time friend of mine recently avoided a catastrophic failure and still is not exactly sure what happened. After dropping his...

I have used and still use Devcon 10110, Marine Tex and Pro Bed 2000, and Kiwi polish for release. Out of the three, Devcon has the...

If you opened the feed lips for the 284 case, then they are too wide. 284=.500 257AI =.473 I built my AI on a Savage 111 that was...

The 284 brass is different than .257 Roberts Ackley improved! I'm not surprised it won't feed!

IF it's a SSA action, then your options are limited. Anything from the 308 family, or 30TC family (Creedmoor)will be too long. Forget...

Lower the charge on a couple and see if you get the same swipe. Those will tell u if it's a mechanical issue such as ejector with junk...

Dunno.... I haven't removed the one off of my Mark V. The only rifle that I have that is Ceracoated.

The SSM actions were shorter than the short action Win 70's The stocks were unique to the super short actions. The 300 WSM will not fit...

Small deadblow hammer. Take the scope & rings off. Screws out of the base. And usually just 1 rap with a small deadblow. Sure beats...

I use Blue on everything…..base screws, base to receiver, scope saddles/rings & saddle/ring screws! Been doing that about as long as...

Took her 19 yrs. to get another Ky buck. Got an old one, at least 5 1/2, waiting to hear back from F&G. 300 wsm dropped him in his...

I'm using the #6 screws on all my rifles. Including the Weatherby Magnums. Clean the receiver and base with denatured alcohol. A drop...