SSG Graybush's latest activity

(131 grain)

I have a 270 wsm and use RL16. I've used H4831sc as well as H4350 with 130, 140 gr bullets. I would use one of these temp stable...

Rflshootr, the 110g Barnes TTSX Does not suck on deer. I shoot the same load with the Sierra 110 and TTSX in an old Ruger 77 All Weather.

It is fast. Barrel length is 24" and I'm still under book max. I wouldn't go any higher than that, but, as both groups are sub-moa, why...

For consistent sizing, it is actually beneficial to cam over slightly and hover for 5 seconds before retracting the case out of the die...

still that's fast. I guess I should push my 270 wsm harder. I've shot factory at 3300 fps but seem to find good nodes around 3150-3190 fps.

Your comment made me check my data, as I did shoot that a few months ago. I need to revise that down, the MV was in fact 3120fps. My...

Ordered the hornady headspace comparator. After doing some research, hornady has a gauge listed as E with 300RUM

To clarify, rcbs states to run die down till it makes contact with case holder and cams over. but makes no reference to checking the...

And while you buying Headspace guages get bullet comparators as well and start measuring cbto instead of coal. Much more consistent. I...

My headspace inserts are numbered by the orfis size, that's looks like a "E" insert and length. Find out the brand and opening size for...

True but 9.5x out of 10 it's fine. I've never had to worry about it in anything I load for, belted or not. Am sure there's rifle...

Got to love it when a plan comes together!

it's super ez, learn what/where a datum line is(Lee manual has it in the specs, I believe, but only use it as a reference), measure...

Don't follow rcbs instructions that say cam over, that's wrong. Use a headspace guage on a caliper, measure some fired brass. Get an...