slv hunter's latest activity
-
Ryan shot this amazing Wyoming Shiras Moose with a 300WM and the 181 Hammer Hunter running a MV of 3050fps. At a distance of 135 yards... -
slv hunter reacted to nkyshooter's post in the thread Need Truck - will trade 8lb RL26 for new F150 Raptor with
Like.
As the title says ... I'm not set on an F150 Raptor only. I'd settle for a 2025 Tundra TRD Pro, a RAM TRX (or a Rebel with ECOdiesel... -
slv hunter reacted to thatguyshm's post in the thread 280AI and Berger 168gr Classic Hunter. with Like.
I created a load just this summer for the 168 hunters. I only had about 70 left from a friends project, so I looked in the powder...
-
slv hunter reacted to birddog 68's post in the thread 280AI and Berger 168gr Classic Hunter. with Like.
Another vote for IMR 7828. I used IMR 4831 with the 168’s in my 280 Remington and it shot great but velocity was slacking a bit so...
-
slv hunter reacted to manitou's post in the thread 280AI and Berger 168gr Classic Hunter. with Like.
I get 2945fps with 7828 and 168 Berger VLDs from my 280ai with vety good accuracy.
-
slv hunter reacted to 204_ruger's post in the thread 280AI and Berger 168gr Classic Hunter. with Like.
I use it in my 280 rem also. I may go by and pick up few more pds of H4831sc. So I can use it in both guns.
-
Contact Berger's tech support, and they will e-mail you their recommendations, similar to the ones below.
-
Welcome from Tennessee.
-
O yea I’ve heard about all over town and all my work buddies are teasing me …. lol 😂 But no it wasn’t me, but I know that exact rv...
-
wELKome!!
-
Welcome to long range hunting from the piedmont of northeast georgia. Great to have you on board.
-
slv hunter reacted to Straight Jacket Armory's post in the thread Bullet Not Feeding Properly with Like.
You can see the one Sid feed lip has been bent up a tiny bit, you can always “tune” metal mags with the correct tools. The one feed lip...
-
I agree with the spring tension that was mentioned, however, your first call should be to Hawkins and see what they tell you to try...
-
slv hunter reacted to Elk Hunter 338's post in the thread How To Get Consistent Seating Depth Every Time from an empirical source. with Like.
SAMEZIES!!! And i will take it a step further and add... a constant steady downward stroke of the press handle to a soft stop every...
-
slv hunter reacted to lancetkenyon's post in the thread How To Get Consistent Seating Depth Every Time from an empirical source. with Like.
My take (without watching the video). For the perfect seat, you need perfectly consistent neck tension, perfectly annealed necks, and...