Seabeeken's latest activity

Cut the extreme spread down to nearly 1/5th what it was today and picked up a little extra avg speed, avg was 2675 with an es of 12 so...

I just got a good deal on 500 new pieces of starline brass so I should be able to sort through those and get a decent batch of brass...

I talked to Mark last week about it and he’s using old run Winchester brass that’s been very consistent for them but the new stuff from...

I'm trying to figure out exactly who makes the best and most consistent 30-30 win brass and before its asked or questioned, yes, it's...

I don't have any pictures of it but when I started handloading in 1974 I lived in an apt and worked in a walk in closet. Had my RC press...

I stopped using redding bushings years ago because I found actual measurement didnt match the stamped on dimension. I also found a...

What barrel length are you shooting, and what barrel length is your load data referencing?

Whatever works to get me single digits ES and SD!

But if it shoots great you will be, do it again, do it again. :D

I create a spreadsheet, print and place in the cartridge box before starting the loading process.

As for RL 19, a load in the 75-77 grains should break 3,000 fps with a 180. As always, rifles are individual, so work up as needed.

Assuming a 24" barrel. In addition to the chart below, Ramshot magnum might also get you there but it would be a max load

Thank you both for the info.

You need the .375 comparator

Mine shot .2 with H-4831SC but didnt like H-4350. A bit fast burning