Sdvldog1371's latest activity

You are correct. The brass gets harder, and tend to split the neck a little later on. At the cost of $2.00+ case it doesn't take long to...

the brass doesn't crumble, it loses zinc and gets softer. That means it resizes differently for 1, for 2 you get a lot more flow of...

The concern is inconsistentency of annealing. Way too little on a case or a few cases and you will get some cracking. That would lead me...

Thank you to everyone who has taken the time to respond so far and for all the information provided. I have read a lot and there is a...

You can absolutely under anneal and over anneal pretty easily as brass is made of copper and is an excellent heat conductor. If you...

Again.... specifically related to 300 prc. The only dies I know of that are supposed to size the web enough to prevent swelling of the...

That's some real flintlock length rifle, Lol. I'm sure it will be a heck of a shooter. Foundation are quality stocks.

I'm considering either a SAC die or a Micron die with SAC bushing. I have a custom honed forster and a hornady I use. The hunting ammo...

Exactly My finding as well. ADG has been the best, specifically in 300 prc. Fastest speeds and most firings. Bullet central micron...

Barely used...and I mean less than 50 cases, Fluxeon Annie with the water cooled coil. I started automating it, could never find time...

That's not true at all. It affects the atmosphere...as in makes confetti and changes it to a celebratory atmosphere, Lol.

Impact Action= Great Bartlein Barrel=Good stuff Trigger Tech= Good stuff MPA Chassis= Good stuff The only things I wouldn't do are the...

I'd do the brake in and thoroughly clean it...then have it nitrided.

The problem is, you will never know. You can try and use your primitive eyeball and best judgment. You can try to use tempilaq. Your...

The best thing you can do is find a mentor. Someone who has been reloading for years. He can tell you what works and, most importantly...