Sdvldog1371's latest activity

Is this a 1 to 1 comparison of codes? I mean are you asking if someone has a lot of, for example 2x fired brass, then they move and they...

I may be mistaken, but I could swear somewhere in their literature that you're supposed to anneal fired brass for a code. It has been a...

I have not, however, I would say that Hot glue, from a mechanical stand point would be a poor choice. Epoxy is rigid when cured as is...

I had issues with my RCBS chargemaster Lite overthrowing, I did modifications to the tube and the bench it sat on etc... I got to the...

Assuming this is at least once fired, I would make sure you utilized the proper pilot code for the cartridge. I had one cartridge that I...

Took your advice and purchased some ADG brass this afternoon.

When I was a lot younger I was in an apartment, bought a dresser from good will,mounted my press to it. Stored bullets and dies in...

Area size and equipment list will help folks give you comparative pictures that are relevant. I personally have a 6ft long 10 drawer...

What’s your definition of compact?

This is what the hunting community should be about.

I already seen it mentioned once. I was going to write the same thing. Take it to an area where shooting is nice and comfortable and...

Do a tall target test to see if your perfectly plumb. It will also give you info on offset to plug into your ballistic app.

I also agree with the ADG brass. I have ADG, Lapua and Peterson Brass for my 3 different 300 PRCs. 81gr N570 behind a 245 EOL gets...

African Shooting sticks. There's also tripods set up just like what your doing. Picture courtesy Rudolph optics USA.