-
If you are being asked to change your password, and unsure how to do it, follow these instructions. Click here
Saskquatch6's latest activity
-
STerminal ballistics of the 6.5 creedmoor
-
SLee has a new bullet seating micrometer that screws into your existing die. For $16 might be worth a try! Saw it at Midsouth.
-
SSaskquatch6 reacted to Phil Rizzo's post in the thread Pleasant surprises with my old .270 winnie with
Like.
Is that a base to ogive measurement, instead of COAL? -
SI'd try 130's My 80's Mountain is really good with those. Not as good with 140's and bad with 150's. Hope you didn't use Mobil inside...
-
SI tagged in and have been chasing .75-.4's with H-4350. 163HHT's Just not consistent accuracy. I gave it a quick clean after 60 rounds...
-
SIf you’re not at max load for this recipe, you may want to test just a touch more powder (like 0.2g) as that vertical stringing is often...
-
SI may be misreading this but I think the OP reloads are chambering fine. I think it was the factory ammo. As far as the bolt closing...
-
SI will look into bumping the shoulder back thanks
-
SSaskquatch6 reacted to Koda_'s post in the thread 7RM Load Development Results – Advice Moving Forward with Like.
Your over thinking this. You have a sub MOA load safely at 3000+fps pushing 160gn bullet is a legit 7RM round, run a seating depth test...
-
SNah, it'll bounce off. You probably need to step up to something more powerful like a 6.5 Creedmoor. /s
-
SSaskquatch6 reacted to Idaho Lefty's post in the thread Is a 270 WSM an adequate elk round? with Like.
A 140 grain Berger, Classic Hunter Bullet, Launched at 3,175 FPS, is STILL Going, OVER,.. 2,000 FPS at 800 Yards from, a .270 WSM ...
-
STo pile on here… Energy is a handy metric but by itself doesn’t mean anything when the bullet construction is not taken into account. A...
-
SI look at a ballistic chart for my caliber and bullet weight. Since I shoot Nosler Partitions and they recommend 1800fps for their...
-
SI have been shooting the 140g Nosler ballistic tips with 58g of H4831 with a cci 250 for a long time, and recently switched to the 140g...