Rosebud's latest activity

Ruger GP100 6” .357 Barnes 140 HP @ 52yds

If the firing pin is using energy to push the primer deeper into the case, or its using energy to push the case forward there will be a...

My 6.5 Creed, L-H, Tikka, T-3X, SS, 24" puts 5, 130 gr ELD-M's in group's from, the 3's to, 1/2 MOA @ 2,800+ FPS for only, $ 850...

Khmplus: That right there is a beautiful stock! Bolt and cheekpiece are on the wrong sides, though. Better warn OP about that small...

I’m able to deal with the obvious flaw, lol. Once though on my first attempt at cutting threads on a metal lathe, I cut left handed...

I actually have a router duplicator (Wisconsin). I have built exactly one stock with it but it turned out really nice.

That’s some nice wood!

https://www.customstocksandsteel.com/gunstock-duplication.html I used these guys a couple months ago. I sent him a McMillan flattop and...

Most likely needs a shoulder bump, could be a Ojive issue as well. Fired cases in one 30-06 that hadn't been sized properly will not...

Will these brass chamber without bullets? If so, then your bullet seating depth (CBTO too long) issue and need to allow clearance with...

I’ve been wildcatting for years. The primers are not the problem. Seat the bullet about .030 longer then what you are currently doing...

I've used over two hundred WR LRP without issues. They were very consistent in ES. And accuracy was on par with other primers I've used...

This is a Lane Precision full custom built on a Bat HR premium action…low round count…I doubt it’s a spring issue. Mac

I had ONE out of the 1000 ea that didnt fire . I reload for my buddy Lou Lander that retired from the military and he lived up in your...

2" @ 300 translates to 4" @ 600 if everything stays the same. I would absolutely consider that acceptable for hunting anything except...