Rosebud's latest activity

Hearing loss is not just related to db level, but how long the exposure is. 8 hours of 85 db will cause hearing problems, a fraction of...

Don't get me wrong, I never had any issues getting them to shoot very accurate loads. Just prep time and cost. They were much better...

Just wait around a bit; everyone has their turn on the wheel of Durp.😆 Before you throw them away, remember that brass lives matter.

I bought some nosler for 280rem, only stuff available at the time. Primer pockets got loose in a few after a little stress in shooting...

Unless you exceed the standard length of the barrel maker's steel, there should be any additional cost. I've been ordering and making...

The area larger above the chamber on a barrel, this is the technical term. Of course, no taper barrels don’t have one. This term...

Shot 123 SST's in my grendel prior to using Hammer Bullets. What I would go back to if they stop making them. Its a killer.

7-08 Rem meets all your needs. 120 grain Hammer Hunter for hunting, ELDM's for punching paper/ steel. The perfect medium rifle IMO

I got this great bull on day 5 of Colorado second season at a little over 200 yards with my 8mm Rem Mag. I did a fair amount of hiking...

One of the guys I load for always got Nosler brass. He was a GS owner and bought from his vendors at wholesale. I had to do lot of prep...

When Norma made their brass, it was much better quality. These days, what you have is what I've experience of Nosler's brass unfortunately.

Best of luck. Shoot on!

Thanks everyone! I think I'm going to cut down the stem so I can keep the die body down like it's supposed to and then add a...

I load 20 rounds at the beginning of each hunting season as designated hunt rounds. New Lapua brass, Varget, and Hammer Hunters. This...

Dry graphite lube for neck sizing. I use a bushing die for bump neck sizing. Once done I push the case neck into the graphite tub six or...