RichCoyle's latest activity

Are you looking thru the scope and dialing or shooting it and making adjustment as you see it on paper? The two procedures are opposite...

BURRIS SIGNATURE RINGS

I'll add the Kimber is lefty loosy. Get an 1/8" punch and put through the holes then a sharp rap with a dead blow hammer or brass hammer...

Putting the objective close to the barrel isn't beneficial for that very condition, it is just the result of one trying to reduce scope...

Maybe you gained a new president.

Since you have all the fancy measuring tools there. Did you measure from the datam line of the cartridge to the base? I am willing to...

Heat the brake with a propane torch. Whoever installed mine OD with the loctite.

It would be important to know how much more elevation you need. The simplest solution may be to buy Burris Signature rings with the...

Unbelievable performance! Thanks for posting.

I'll use scrapers and go between hills, then baracade the sides. Clear span 100-150' width every 25'. Concrete deep enough to hold...

Sounds cool. Know I will never see but would sure like to. Best wishes and good luck.

National Felon League! 🙂 memtb

Getting a scope as close as possible to the barrel is such a 1980s way of thinking. Get it to where your head is in a comfortable...

I'd go with a .340 wea. Brass is easy, good velocity, fits in a std. mag. action. Best capabilities on a std. .375 size case. Mine is...

Discusting!