Rflshootr's latest activity

Grand, IMR4350 and 100V should all take you over 3000 fps and be good performers.

I used to shoot that bullet for varmints......then they stopped making them. That really torqued my cookies.

Guys when Remington first came out with the 260, what twist did they use? Reason I ask is a friend has one of the early ones and he says...

I have a 1st year production (1997 if I remember right) 260 VLS and as close as I can tell, it's a 1:9 1/4" twist. I also have a pulled...

I’m wondering why you waste time removing the ejector to setup dies. Stop doing that process and stop losing gun parts from un-needed...

Try this instead:

he's measuring the outside of the brass neck before and after seating the bullet, so the bullet is expanding the neck by .001 ( which is...

Maybe you're right! 🤣 But I think my math was ok. 😁 And try chamfering the inside of the case mouth a bit more.

I'm just curious mind you, but what method are you using to measure to 50 millionths (.00005)? Oh Wait! Maybe you meant .3345 on the...

These are all fine and great recommendations. Again, gotta be a bit careful when using abrasives on their barrel without some guidance -...

Polishing won't get rid of the marks. It won't extend barrel life in that barrel. If you shoot it a lot, put a new barrel on order, put...

Thanks for all the advice. I am of the school of it ain't broke, don't fix it. I was just thinking if I ran an abrasive it would smooth...

If it Still shoots good Leave it Alone. Go shoot it and have Fun. Borescopes Don't always Tell the Truth.

If it shoots good leave it alone. The end goal is a good shooting barrel and you already have it.

..someones got too much time on their hands !! Throat would be cleaned sighting it in...lol