Recent content by relabbe

PM sent to you

I looking for a bottom metal and detachable magazine for a Remington 700 short action. New or used. Thanks.

As suggested I bought a go gauge and recieved it two days ago. First, I took the extractor and fire pin of the blolt, then I put the go gauge in the chamber and push the bolt on it. I couldn't close the bolt. Remember that I told you that I could put in some loaded factory ammunition in the...

Thanks Specweldton, I guess I should try the go gauge.

Thanks J E Custom, I measured all my Factory Loaded bullets and the space between the ream and the head were all in between 0.215 to 0.218 inch. (winchester Supreme Nickel plated) which leaves a minimum headspace of.002 inch if your chamber is tight to the go gauge. The minimum headspace for...

I just put a new 300 win mag barrel on my 700 remington long action. I have a gunsmith book that states that the go gauge will fit if there is .220 inches. I used a new bullet and a shim on it back to measure my head space and I have about .218 inch of headspace. I cycled the rest of the my...

Thanks Montour, Would applying a propane torch flame to the action damage any of the bluing or the stainless finish? I guess if you wait to see some smoke coming out the sight screw hole it must be pretty hot. Yes, you are right I was referring to a remington factory barrel? I had to take...

Thanks James H

I just unscrewed my barrel off my Remington 700 300 win mag and I noticed there is a gummy compound in the treads. What is this? When screwing back the barrel in place, is there anything that need to put on the threads? Thanks,

Hi Bill Please send me an email. I am interrested to buy it. my email address is: [email protected] Thanks Rene

Thank Tom Thanks for the email about the 300 RUM. I will take it as a back up but I am still looking for a 300 win mag caliber barrel. I am trying to avoid the paperwork that needs to be done when changing caliber of a rifle.

Thanks Tom I appreciate the offer but I have a long action with a bolt with a magnum face. I prefer to stay with the magnum.

I have a Remington 700 long magnum action in need for a barrel. I would like to find a new take off 26" barrel. Senderro will be best for me. Let me know if you can help. Thanks

I am looking for an old sendero model new take off barrel in the 300 win mag caliber, Stainless steel , 26 inches. (Not the sendero 2 model). Will also be interested to buy the matching stock if good quality. I have a 700 REM long action RH, in need of a new barrel. Please PM me

I broke my extractor for my BSA 30-06. Let me know if you have one for sale