Recent content by pole-spear2

Thank you

Thanks for the insight. I'll let you know how it worked after Thanksgiving

Nat, I just did a similar job on a Mark V, and the spring would not adjust down to less than 3 lbs. I pulled the spring out, cut it down, and restreched it to the origonal length. I might get trashed on here for doing it, but it seemed to work well. One other thought is to measure the...

Same Accumark I referenced in an earlier post on a trigger job, 30-378 wby. I plan on skim bedding this rifle, as it has a fair amount of play between the action and the aluminum inserted stock. With the screws out there is at least 1/4 inch of side to side play (slop) when the action is setin...

I'm not a gun smith so I would like some feedback. I have an accumark with a particularly crapy trigger. After some reading have found that these "adjustable triggers" will not turn down turn down to less than 3lbs. That is too much for me. This trigger also had more travel and a burr or...

Thanks- I was impressed with the night force web site

I am new to "Long range shooting" Currently have a Mark 5 300 wby and Mark 5 30-378, both with weaver bases and rings and swarovski pH scopes. These shoot real good (to me) They are both synthetic stocks. no pillars or bedding. I am working on a new accumark 30-378 I need to put rings...