Recent content by Plugdumper

Found my accuracy problem, copper fouling was really bad, action set screws were loose. Loaded some 180gr nosler balistic tips, 117 gr h-50 bmg coal of 3.80 shot 1/2" moa 100yrds things are at least going in the right direction now. I"ll have to try the load you mentioned.

Love this web site the information you guys lay out there is usually right on the pig sticker. Thanks for the help I will mull all that over

Would like to add new barrel on my 30-378. Torn between a Lilja and Krieger anybody have any suggestions about the 2 choices.

Thanks I will give those a try.

Have done everything that I can think of from copper fouling to set scews in inch pressure. I'm stumped. Can anybody offer any help. Working with Barnes 180 gr ttsx, h-50bmg, fed215m primers, wby mark 5 rifle. Thanks for any advice ahead of time.

Have addressed evrything that I can think of. Trying to work with Barnes ttsx 180 gr, h-50bmg, fed215 primers, only have so much to spend. Need starting point seat depth, trim length. It's for wby mark 5. Thanks for any help.

Can anybody give some reloading advice for wby 30-378.

Have owned this rifle for years have never found a solid reload. Currently trying 180gr Barnes ttsx bullets with h-50bmg powder fed215m primers. The rifle is wby m5. Can anybody give a starting point using these components. Seat depth,trim lenghth,powder charge, or just some place to start my...