PatriotHenry's latest activity

High pressure- These cartridges run right on the edge of 75,000 psi. where brass will no longer spring back, after firing. Soft brass...

the saum brass has a rebated rim it never comes close to the feed lips on any mag i have seen.

I don't own any DBM's but I'm curious to know why the sheet metal body of the mag is that close to the rim diameter. .005 clearance is...

Typically that is caused by over pressure. Or excessively unsupported chamber.

Here's the SAAMI spec for the SAUM family. Your measurement puts it real close to the middle of the tolerance which is good. If these...

He said it won't go into the shell holder. I've never heard of this. Web will swell from over loaded case and shoulder will need...

When you say rim of your brass, are you referring to the case head and extractor groove? Or is the expansion above that? Sounds like you...

good job! smoke a pack a day!

I was breaking in a new hunting rifle during the Elk hunt here in Utah. The elk were a bit harder to find than I'd expected, but this...

Good morning fellow Mule deer enthusiasts. I wanted to share a photo of my granddaughter’s deer from Friday. My son and I had not seen...

For those curious about velocities 243 AI 3245 fps 7 SAUM 3051 fps 7/300 NMI 3250 fps 338 NMI. 2951 fps

Tried a 40 degree and it didn’t add much to the performance

That 30* shoulder looks out of place. Awesome lineup though.

Starting from left. 243 AI with a 108 Elite Hunter 7 Saum with a 175 elite Hunter 7/300NMI with a 195 eol 338 NMI with a 275 MTH

Finally was able to harvest a bull in Colorado this year. It was a small rag (4x3) but I worked for it. My hunting buddy and I got...