pantiti

Thank you for this info. The eld VT does great out to 400 but that is when the 88 surpasses it. The eld VT definitely has a lot to offer.

The 223 wyled is a hybrid between a 223 Remington and 5.56 nato. It is very popular in Ar15s. The promise is that is has better accuracy...

Based on the ballistics that one outperforms the rest. Is that coal based on 223 rem, wyled or 5.56 nato? I have 73, 80, and 88 eldm in...

Another possibility, if you’re open, would be to try the Hornady 62gn ELD-VT. Profile and BC of the 75gn ELD-M with the speed of the...

I have a RRA upper and it's super accurate but it's a 1:9

Makes sense. You will only gain about .17" Case capacity because the 88's are 1.25" long versus at 55gr at .74" with saami 2.26" oal...

I'd be happy with 2700

I don’t think you’ll ever get the speed. I’m running a 26” with 88’s and 2600 -2700 is all I’ve been able to get. If running a 20” I’d...

2.6" is not SAMMI for 223 it's 2.25" so I will be picking up about a quarter inch in length. Maybe not enough... Id rather go 22...

What freebore did you use? It seems like a lot of guys are having good success with 223 wyled. I will be limited to 2.6"

I have several fast twist 223/5.56's, and in one of my long throat 26" 1/8" twist bolt guns, I run the 80's with 2520 @ 2,900 fps and...

Something I noticed when looking into 22 arc is that I cannot find go nongo gauges is that what everyone else is seeing?

That's my main reason. I probably have 2000 LC cases. I was thinking about doing 22 creed but even the minimum loads provide more...

According to Hornady 5.56mm load data with a 20" barrel, 2700 send do able but I'd have a longer throat.

Yes because brass and dies and bolt. The valk uses the weird half size bolt. It would just add cost to my project with as far as I could...