Old Rooster's latest activity

My 2 sons have reached the age to deer hunt, here's some happy boys with their first deer. . Share your happy first hunters success too!

I use an acid brush just to make sure. Several coats of release agent ensures a good release. I have use many different kinds of release...

The area under the recoil lug in the stock needs to be relieved so that the tape doesn't affect where the action sits in the stock...

Another vote for Devcon and pillars. Holds up forever and easy to work with.

Brownell’s sells bedding kits, pillar kits and all bedding compounds. Personally, I make my own pillars and use Devcon 10110 for all...

I have used and still use Devcon 10110, Marine Tex and Pro Bed 2000, and Kiwi polish for release. Out of the three, Devcon has the...

I have some Dead Air Mask cans. I pull the internals and let them soak in CLR. They look like new when I take them out a few hours...

Eric Cortina used CLR regularly and showed a LARGE empty container that he finished up with on one of his videos. He said that even...

I know CLR will damage bluing but wasn't sure about Carb-out. Thanks

I've used it on both but use a good PMA Tool bore guide. The can says that "it's safe for all metal and all metal finishes". CLR... I...

Mike can you use Carbout with a blued gun? Or just stainless?

I've upped my cleaning frequency after doing battle with a carbon ring in my 7mm Rem Mag. I put a patch around a brush, soaked it in...

Without using a borescope, you'll never know what you are really dealing with. Hardened carbon, build up over 1,000 rounds, is nearly...

You can. But you'll ruin the reamer. It'll be dull as can be after one turn against the carbon. I clean my barrels after every shooting...

You will want a good carbon cleaner, and some elbow grease and time. I've not used any of the products mentioned, but I'm sure they work...