Noobie's latest activity

JB weld and popsicle sticks and kiwi shoe polish

The area under the recoil lug in the stock needs to be relieved so that the tape doesn't affect where the action sits in the stock...

Thanks for the tips. Seems it may be better to buy separate ingredients than a kit. Saw a Brownells youtube on acraglas gel and it seems...

I use JB Weld w/ shoe polish for most guns for the simple reason it's the only one I can use without issues. The Probed 2000 kit is...

I have used and still use Devcon 10110, Marine Tex and Pro Bed 2000, and Kiwi polish for release. Out of the three, Devcon has the...

Brownell’s sells bedding kits, pillar kits and all bedding compounds. Personally, I make my own pillars and use Devcon 10110 for all...

Another Devcon vote, but I use the Aluminum Putty (10610) as it is actually stronger than the Steel Putty that most everyone else...

Bought a wood stock to replace a plastic one for a bolt action 338 WM and need to bed it. Looking to buy a kit that comes with the...

Not the OP, but here is my ultra-nerd'd out 8-day backcountry gear list/breakout for my 2024 elk hunt in BC out of my Exo K4 5000. Tried...

I'll be a lone dissenter here and plug for the Remington 700. I built a gun a few years ago just for the occasions when I might get to...

Long action/magazine and fast twist to stabilize VLD bullets. Non-belted magnum because headspacing on the belt causes issues and the...

So you are going to have a roof over it? Does the roof need to be rigid or can you pull heavy fabric over a frame with motors as needed...

Never mind...

Just saw this thread. Prayers sent.

Pretty obvious it was meant to be attached using a sloping mount. You could probably get good $$ from a collector. If the optics are...