Recent content by ndthwacker

  1. ndthwacker

    N-565 Powder temp stability???

    Awesome thats what i was hoping to hear from somone with first hand experiance, thank you for the reply..
  2. ndthwacker

    Anyone tried Bergers Test for VLD seating depth?

    This was a seating depth test at 600 yards. With a 6.5ss 142gr smk and n565 .005 off the lands in white , .015 in purple, .030 in green... I clearly didnt do the entire test but didnt feel like i needed too..
  3. ndthwacker

    6.5 builds ...let's see them

    6.5 ss Defiance deviant hunter 24in proof sendaro 1-8 twist Trigger tech special Apa dbm Accurate aics mag AG composite privateer stock Vortex viper gen 2 Vortex rings Cherry bomb for when my trash panda can gets here. Shoots 142gr smk 3285 (@10firings on brass) This gun flat out shoots...
  4. ndthwacker

    6.5 PRC in a WSM Action?

    If your considering a PRC or SAUM You need to look at the 6.5 sherman short.. ADG makes brass that needs to be fireformed, and i seen on the website that a company in SD is going to be making fully formed adg brass in the future.. Im pushing a 142smk @ 3285fps 10 firing on brass and only have...
  5. ndthwacker

    N-565 Powder temp stability???

    I was wondering if anyone has done a temp sensitivity test on vitt N-565.. If so i was curious to see what you came up with for your rifle/ load?? I been playing with it in my 6.5ss behind 142smk. I have had very good success with it and the smk. Im running 64 gr n565 pushing the 142 at 3285...
  6. ndthwacker

    Help with Lightweight 6.5 build

    I got to do some load testing. Iv tested h-1000 behind a 142gr smk, bergers 140gr hybrid and 140gr Elite hunter.. long story short i started testing with a 1lb tub that i ran out of quickly and when i switched to my 8lb tub it was alot hotter then my first. I ended up having to back my loads...
  7. ndthwacker

    Help with Lightweight 6.5 build

    Well dont hold out on us show us a picture..
  8. ndthwacker

    Help with Lightweight 6.5 build

    Yes thank you.. i think somone corrected me on the 8th post.. i will go edit my post to prevent misinformation.. should have done that rogjt away
  9. ndthwacker

    6.5 SS (Sherman Shortmag) Q@A

    Pretty much just bits and pieces throughought the forum
  10. ndthwacker

    6.5 SS (Sherman Shortmag) Q@A

    I know i think iv read them all and its all very informative. I dont need anymore data to start really i just thought maybe it was going to get published in something
  11. ndthwacker

    6.5 SS (Sherman Shortmag) Q@A

    Do you know when and where they will be avalible?
  12. ndthwacker

    Help with Lightweight 6.5 build

    Well this is what i ended up with. 25" proof sendero 1-8twist ADG composite stock Defiance deviant hunter Accurate mag Trigger tech trigger. I have 100 rounds fireformed and 15 rounds loaded up with 147 eldm and 59gr of h1000 to test tom for seating depth. Also i have a cherry bomb on it cuz...
  13. ndthwacker

    Ring height

    Thank you very much. Those are the same ones i have on a Christensen arms MLR with the same scope i mentioned and 20moa rail. And my scope sits perfect on that rifle and was assuming this was would about the same but thought id ask.. Thank you again
  14. ndthwacker

    Ring height

    I ask questions so i dont end up with a scope off my barrel like yours..
  15. ndthwacker

    Ring height

    I ment vortex viper 5-24-50 gen 2 sorry
Top