-
If you are being asked to change your password, and unsure how to do it, follow these instructions. Click here
Mikecr's latest activity
-
Mikecr replied to the thread Quickloads ?? Is it worth the $$.No matter the source of reloading info, powders vary by lot. At least with QL you can calibrate your local powder lot, per the charge... -
Mikecr replied to the thread Quickloads ?? Is it worth the $$.I can't say it like Darkker, but there are some crazy-wild selections in QL. Things that could get you in a mess. So the golden rules of...
-
Like Mrvmax, I always run my loads through QL. In my hunting rifles, I shoot mostly machined-copper bullets for which there's no...
-
Mikecr replied to the thread Quickloads ?? Is it worth the $$.I was an early adopter of QL I don't know how **** long ago, and always loved it. To be good with it there are things to learn and...
-
Mikecr replied to the thread Lapua case necks too thick for my rifle.I accept 12-13thou, and turn necks to and within this range. Here I get reasonable tension with low variance. That's just me. I turn...
-
Mikecr replied to the thread Lapua case necks too thick for my rifle.I would not like necks so thick, either 14thou for Barnes, nor over 15thou for Lapua. And the barrel finisher should have engraved...
-
My 260AI, custom chamber, shows no brass movement for over 6 firings. The chamber has '0' headspace, body has .001" above unfired brass...
-
Mikecr replied to the thread Fireforming.WHY is always a good inquiry. But I don't know.. I just know it does, and does so evermore with lower shoulder angles. If this is a...
-
Mikecr replied to the thread Lapua case necks too thick for my rifle.Factory fired/unsized necks Lapua unturned/loaded necks
