Mike6158's latest activity

Agree, stay as far away from atn as possible. I had one was so bad I would have write off night hunting if my brother would not have...

Correct. I didn't pay attention to the XP / XL part. Sorry about that. The XL is $7k for 1024 x 768. Even so, the XP is the same...

The specs you listed are for the Thermion XL50 and you listed the price for the Thermion XP50. Those are 2 completely different scopes...

Looks like I've exorcised the demons! Soaked it for a while with some Butch's, then used a .25 cal nylon brush wrapped with a patch and...

I’ve used CLR in an ultrasonic cleaner to remove a bunch of carbon out of a Titanium suppressor. The finish was marred, but the can was...

I have some Dead Air Mask cans. I pull the internals and let them soak in CLR. They look like new when I take them out a few hours...

Eric Cortina used CLR regularly and showed a LARGE empty container that he finished up with on one of his videos. He said that even...

I know CLR will damage bluing but wasn't sure about Carb-out. Thanks

I've used it on both but use a good PMA Tool bore guide. The can says that "it's safe for all metal and all metal finishes". CLR... I...

Without using a borescope, you'll never know what you are really dealing with. Hardened carbon, build up over 1,000 rounds, is nearly...

I've upped my cleaning frequency after doing battle with a carbon ring in my 7mm Rem Mag. I put a patch around a brush, soaked it in...

Sounds like a carbon ring. Also I would imagine that your barrel throat is showing some signs of wear. A bore scope/camera will tell...

2 years, 2 bucks, same Savage .243, and the same 83gr Stone Hammer Bullets. Last year's non-typical was shot at 175 yards. This year's...

It should look cool when you shoot it at night.

20" is minimum for Magnums. IMO Do what you want and report back be the Ginny Pig..🤣👍