med358-boise's latest activity

Well, let's do some back of the envelope math. Stated velocity is 2800 fps for a 255 grain bullet from a 24 inch bbl. Let's say that...

what velocity and accuracy are you getting now?

One thing to consider is do you want to call your own shots? If yes, the larger cartridges and heavier calibers become harder and harder...

I recently made a decision that you are looking to make. But I wanted to set up a lightweight rifle that would shoot factory ammo...

90% target 10% hunting. A 30-06 done right fits my bill. I have/have had RUMs, WMs, Lapua…long range with magnums and barrel life are...

Just read the part - "until, I get into reloading". That changes a lot of things. I would say 7 PRC in that case.

Douglas Premium XXAG. Very high quality barrels, fantastic service, and turnaound. I have had 4 of them over the years and all shot...

If you scroll down this web page, you will see the most common cartridge selection for F-Class open which includes shooting out to 1000...

This somewhat addresses another topic on this forum, "zero range", which helps me justify my position on that topic. Using your...

Yes, but to re-emphasize G1 and G7 are completely different formulas and "metrics". Its almost like saying I had a formula written for...

I would add that all published BCs are just that published. BCs will be slightly different in every rifle based on velocity and some...

FYI JBM is showing the G7 as .229

G1 146.0 inches drop 17.4 MOA G7 143.3 inches of drop 17.1 MOA You should familiarize yourself with JBM ballistics

@Clem Bronkoski, Which TSX are you trying to figure out? I can run through Strelok Pro to see if they have a G7 listed. Of course...

I suspect you have made an input error. For example, I just ran the Barnes 168 TSX using the G1 published value of .404 with a velocity...