med358-boise's latest activity

Not according to page 3 of the manual Use the following procedure whenever you need downward point of impact adjustment:1) Turn the...

That is actually a really interesting point. I just did a trial and error on one of my 308 hunting loads and a ballistic calculator...

Thanks for proving my point.......

Speaking of 'incorrect assumptions'. Where do you guys come up with this 'touches line of sight once' crap? In your 'scenario' the...

The angle of the scope's body, which is what you change with a canted mount, is completely irrelevant to anything related to the...

Bore Axis labeled in Post 10 is also called Line of Departure. The bullet immediately falls from the Line of Departure but does indeed...

Fackler's work is very informative, I remembering reading it years ago. As I recall, he discussed both penetration and fragmentation...

I think folks are questioning how much documented performance there is of a 6mm 103 ELDM or similar bullet impacting at say 25-75 yards...

Regarding the Wiser clips, you can remove the stop pins in the clips and that gives you an infinite set of angles.

That is fantastic! Dan and AJ are fortunate they have a caring friend like you.

This is "Long Range Hunting". Nothing to gain by high BC bullets designed to open at lower velocities. Out to 500, there is 0 need...

Only if you you were currently shooting a low BC bullet (say ~.335 BC) and your cartridge was capable of handling a high BC bullet say...

You might want to look at this thread. A lot of it is personal preference and how much weight are you willing to carry. There is also...

I replaced all my triggers with Timneys

I forgot to answer a portion of your question. I don't have a preference for a specific vintage of 700s. Mine were all built in the 1990s.