med358-boise's latest activity

There are plenty of examples of cartridges that don't measure up to the one bullet diameter rule. The 223 Rem, 6.5 Grendel, 300 Savage...

I have very accurate free floated, 1 very accurate full length bedded, and two very accurate front pressure pad rifles. As with most...

Two things to consider: 1) Tikkas can sometimes be a little finicky getting the barreled action seated properly in the stock. You...

Perhaps, I personally have never had much use for 8mm-358. Although, I love my 9,3x62.

You can try 37.2 grains of h4985 (per Hodgdon) an 130 grain coper jacketed lead core bullet and work up till you find acceptable...

Your rifle has a magnum bolt face, unless you are going to get a new bolt you are going to have a magnum caliber. I would consider...

168 Barnes TTSX

So you are asking a ton of questions here. OAL in reloading manuals really doesn’t mean anything. Each rifle is different and each one...

I would call hammer (they use a softer copper than some of the other mfgs) and have few bullets in the 120 grain range and I will also...

K.E.C, That is very encouraging. Hard to estimate potential velocity just via extrapolation and I purposefully went conservative...

The results of my conservative stabilization calcs were that with expected velocities for 130 grain bullets in the low to mid 2800s that...

I will likely pass on the whole thing. I really like the idea of the Sig Cross with the folding stock/chassis look for just a little...

What say yea?

I assume nobody sells just T3 actions and that you buy a rifle and scrap the barrel?

I was hoping to use mono-metals and I know copper bullets are longer but about the only thing that I can find that stabilzes is Barnes...