med358-boise's latest activity

A gunsmith can thread on a barrel stub or other cut offs from older barrels that is larger in diameter and then taper that into the...

No.

A couple of ways to approach this. Use 125 grain load data and find an accuracy node at the bottom of the range using the OCW method...

Great cartridge, yep... it looks like it's working great to me from the photos. I've only owned one 6.5x55 Swede, in a very nice M96, an...

I have a Tikka T3 Lite that is suppressed. Can't remember the name of the technique the gunsmith used but it can be done.

One of the things I have learned on the internet is that: There is a difference in the performance of two identical projectiles...

Yesterday at the range prior to scope adjustment and today hunting at 132 yards. 165 Hornady Interbond, 48.7grs of IMR4064. She didn’t...

I had this same issue with a Howa Super Lite in 308Win. Had heavy bolt lift with Federal Nat'l Match. A good chamber scrubbing solved.

^^^This times 10. This site is great!

Congrats. 458 is plenty long enough. While it is great to have the capability, I will take 50 yards over 500 yards every day.

I would go 20" and use a 7" can. Rifle will still be reasonably handy and you will get most of the benefit from the supressor.

To answer your question you might consider Burris Signature HD 3-15 44mm with the Plex reticle, ~$500 or the Leupold VX-3HD 4.5-14x40mm...

Great job young lady...that smile is the best!

As I mentioned in Post #7 above, COAL length is a fairly useless reference as soon as you switch bullet types. The tip of the bullet...

Big congrats to the young lady and a way cool rifle!