Marky_mark's latest activity

I have a 338 lapua ct edge that was super inconsistent to try and develop a load for My 6.5x284 has been good, but it has a different...

I know lol I had a 223 like that unreal Then i dump 4k into a fierce and the barrel is hand tight

If your brass is larger that what your chamber is That’s 100% the reason why it’s having hard extractions

It might explain the velocity increases Use a bore scope and check if you don’t have one you could just scrub it with jb bore paste to...

I would be taking a lot of measurements and comparing it to the saami reamer specs

The problem with fierce is lots of the issues are safety related or its something that makes them non functional. You don’t even get...

My build just didn't seem to like H1000. In my 24" barrel the RL-26 gives me better velocities and accuracy. I had issues with early...

You can go on gun broker and buy a 7 SAUM proof prefit for a tikka right now.. their manufacturing tolerances are top notch for the price.

They came out as a company that could deliver something similar to a custom rifle or a gunwerks But for half the price They never ever...

https://www.wheeleraccuracy.com/videos lots of info here do your die fit your chamber is a good one same with te clicker one

These dies dont size much at the base of the case

thats not what is causing the cases to jam

reamer spec is .532 at the .200 line So if your fired brass is coming in at .5335 Its jamming in the chamber at this spot I'll...

Make sure it is legit. That is a good to smoking price depending on what model rifle and scope.

hardy makes some nice rifles