M1A1ABRAMS's latest activity

I used Magpro for a quick, soft shooting, class load with my 7SS. Nothing spectacular for speed, but I wasn't pushing it. Fantastic...

I have used Magpro in .257 WBY/145 Black Hole, .300 WSM/215 Berger, and .338 Thor/250 Hornady BTHP, which works well.

I recently tried MagPro as well because RL22 is an $80 unicorn. I actually found pressure before the listed max load. I've never had...

Recently tried some Magpro in my 7mm Rem Mag Winchester Model 70 and also in a 6.5 PRC Bergara. Yes it is temperature sensitive. But...

I was using Reeding comp. shell holders. Web dia. on Norma and Peterson fired was .4705 and FC was .470, sized Norma .4685, Peterson...

Did you happen to measure the neck diameter of a fired case before resizing?

Got time to work on brass, after reading post, (thanks to all that responded) I had to set shoulder back more to get it to work. All...

I'm guessing the brass is thick at the neck shoulder junction and when you expand it, the neck shoulder junction gets moved out (like a...

Check neck diameter at the mouth and at the shoulder with mics after sizing and after expanding. You may have a donut at the base of the...

340, what is the neck OD of the Norma vs other after mandrel use? Also do you have the button removed from your FL sizer? I am also in...

Not sure if you have the ability to neck turn a piece of brass, but sacrificing one as an experiment would also answer the question...

Brass was new and fired in this rifle, also trimmed to spec. and does not touch the top of mandrel. I have repeated the sizing process...

he said that it chambers fine after sizing and the problem only occurs after using the expander mandrel that should eliminate a sizing...

I have a friend doing 2 piece shotgun stocks and he's doing a good job, learning every day.

Truly is sad. Engravers too.