M1A1ABRAMS's latest activity

I trim every firing for consistency sake. The Giraud trimmer makes it quick and painless.

Once I get to max listed length, I trim to minimum "trim to" length. I use the Forster 3-way cutting heads. Takes about 10 seconds per...

IMHO, let's take for instance the 308 case. Maximum length is 2.015 and recommended trim is 2.005. After sizing my brass, if any is...

I have found that new brass will stretch the most on the first firing. After the first firing, I will trim all brass after resizing so...

For the safety aspect, if you are shooting a factory rifle, chamber a new piece of brass and then run a borescope from the muzzle end I...

You'll likely get different answers on this topic but I trim a group of brass if one piece is longer than the max length spec. I reduce...

I’m still very new to reloading and wondering how often I should trim brass? I know this is going to require measuring each piece of...

Here are the results of the season on the saint johns, one from Poinsett and the other from Washington. They were both a little over 9’.

Now that's a set of choppers. OUCH !

Sorry I do not have any.

Mine loves 43.5 Of varget too Thanks Buck

Worked up some 308 Win for my wife’s CVA Cascade at 100 yards, three shot groups. 150 gr Hornady SST VARGET Federal 210 primers Norma...

SPF..

@ James DeTorre the site is down again. This happened about a year or two ago and it was down for a few days. The format changed when...

I guess I'll test their warranty. It's not that old. I feel like I lost my glasses...