LoneTraveler's latest activity

Yes!! Jebb I was at the end of my rope. One smith said he returned it to the Weatherby factory. " Sorry but no parts for that gun .Too...

Something has happened all at once, Making the rifle open its group. Scope, Scope mounts, Barrel stripping jacket material, Banged...

And you are correct, you will learn way more about rifle building/gunsmithing from a problem rifle than a perfect rifle.

Well there is something wrong with it. You just saw it and yet you have no problems doing it again. This is why there is saami and...

Just a word of warning. You want to check the paper work, That came with the rifles close. Some air rifles have to use a special air...

If the state hunted has a waste law, You have to stay within the law. Heart and liver included in some states. The hide and hair hold...

Does that hind quarter show a wound..??

I have used a cheap set from Northern tool I have used a expensive set from snap on they both work the same when you’re working with...

That extractor looks like it just went By By. Did the casing show an Ejector flow imprint, If no flow into ejector hole, The extractor...

Yes, that’s your extractor. Call Terminus and they will more than likely send you a new one. If I remember correctly there was a serial...

Haven't seen a Sako Rifle in a long time. Sounds like Sako rifles are now made on a action designed like Mauser, Ruger or Remington...

The 52 Win. was the king of 22 RF rifles for many years. They I believe were 3 different barrel weight. A standard, Target barrel and...

Has the CZ 457 had a shim put in the bolt? I was putting a shim in the bolt of my CZ 457 last week. In choosing headspace for all...

Some desire this amount of "tightness" to limit shoulder stretch. I have shot thousands of rounds in this condition by design. If you...

From the pictures, Looks like the spring may have been put in the magazine backwards, Or spring was not bent correct, in the folds...