lancetkenyon's latest activity

Not to derail the thread and go sideways but I have experience with the list above with 3 of the 4 listed as well as the 7 Saum which is...

Before you do anything, examine why the 6.5x284 got its bad rep and what you might want to do with your gun. It was the hot ticket for...

It's one of the better units for bigger bulls in Arizona, it's my backyard. The unit borders the Ft. Apache Reservation which holds some...

Might as well do the .260AI. Go for more gain since you are thinking about it.

Ooops! 🥴 I thought for sure I had seen it somewhere but must be mistaken

7-300PRC 28 Nosler 7-300NMI 7-338LMI

.090" is short. .290" is long. .200" is even pretty long. For a 7SAUM, I wouldn't personally shoot any heavier than a 184 Hyb. So...

ADG makes 6.5-284 brass?

Berger 245 grain EOL’s at 3070 fps.

I’ll roll with the sciency guys on this one that actually manufacture the stuff.

I just did one last Wednesday 11-13-2024 so hope it clears quickly and ATF just approved my import/export permit to take my suppressors...

I just had an individual eForm4 approved in exactly 5 days. In late April, I had two done, one in about 48 hours and the other in 41...

If it's a suppressor adapter BRAKE, it is most likely installed with Rockset. Soak in water to loosen Rockset, it is designed for high...

I have seen that so many times, and as many know, I like to test the boundaries. I have taken brass like that and sized it back to...

I’m guess’n there would be sufficient neck length for enough tension for the bullet…..but certainly not excessive tension. memtb