lancetkenyon's latest activity

I have yet to lay eyes on one in AZ. I keep looking, but they are pretty sneaky here. I have seen a few in AK when I have gone up for...

When I got my first two cans (TBAC Ultra 7 and Ultra 9), I had 7 rifles with well established, bery accurate loads. Two I knew would...

This topic drives me a little crazy. Speaking strictly about bolt action rifles: Suppressors can impact a rifles accuracy and...

I went back and read the first thread. According to that, your load is way above what hodgdon has listed for max with IMR4350 and a 120...

...and there's that 🤔

When I started reloading, 1971 I found a sweet load for my Rem700 30-06 that shot bug holes at 150yds. So I accumulated a ton of...

I have been reloading for over 50 years, and have never experienced any sort of cold weld. Some of the loads I have fired are over 8 yrs...

I think it depends on brass prep. Once fired, correct neck tension, and a bit of carbon left in the neck (not wet tumbled with steel...

ALL of the rounds did that, or just one. I have done seating depth testing at .010" variations up to .070" or so from the starting one...

.030" deeper and 200fps gain in velocity with way overpressure? I doubt it was the extra .030". Even if you were hard compressed to...

I have found the 156 to not be sensitive, but I did settle on .040 off touch. I ran five shot groups at 200 yds from .010-.040 in .005...

If your looking for speed for whitetail Maybe the 130 Hybrid OTM Tactical. I haven't tried them on whitetail yet but they are easy to...

Thanks for the reply

Did you try the Staball HD with the 150 ABLR? That's what I am fixing to do with my 6.5-284. Since the shooting world seems to have...

I use N560 with the 140 elite hunter Lapua brass, F210M primer. Getting 2,970 fps on a 20" barrel that is just now speeding up. I don't...