lancetkenyon's latest activity
-
lancetkenyon replied to the thread Rem 700 Long actions can shoot almost any belt cartridge.IBTL... -
-
lancetkenyon reacted to MagnumManiac's post in the thread Rem 700 Long actions can shoot almost any belt cartridge with
Like.
The factory 338 Lapua is not a standard LA, it is the same as a RUM. I have built many rifles on all of these actions, they are all... -
lancetkenyon reacted to MagnumManiac's post in the thread Rem 700 Long actions can shoot almost any belt cartridge with Like.
1st, the magazine of a LA REM 700 is 3.7”. 2nd, the feed rail width of a standard (.473”) is NARROWER than a magnum LA REM 700, so just...
-
1st round smack down with her infamous pink 7mm08 at 580 yards.
-
Successful youth hunt dropped this Buck at 100 yards with a Tikka 22-250 with a custom 8TR running the 68 Hammer HHT at 3600 FPS...
-
lancetkenyon reacted to MagnumManiac's post in the thread Lapua case necks too thick for my rifle with Like.
My 260AI is a custom reamer ‘no-turn neck’, but my own Lapua brass requires turning to fit comfortably. If I don’t turn, clearance is...
-
lancetkenyon reacted to Muddyboots's post in the thread Do I twist it off...or order dies? with Like.
If you shoot it, you will be looking for another parts rifle....🤔
-
If you don't shoot it you will always wonder.
-
lancetkenyon replied to the thread Lapua case necks too thick for my rifle.Not that I am aware of. If you want thinner, get .260 Rem brass and neck UP.
-
lancetkenyon replied to the thread Lapua case necks too thick for my rifle.Loaded cases? Or primed cases? I don't know of any neck turning tools that can do it with a loaded case. You have to have a turning...
-
lancetkenyon replied to the thread Lapua case necks too thick for my rifle.When you neck down, you are taking all the brass that is in a .308 neck, and forcing it down to .284. Meaning the brass slightly...
-
lancetkenyon reacted to cajun's post in the thread Lapua case necks too thick for my rifle with Like.
If it’s a custom the smith should know which reamer he used. A saami reamer would not have issues. This is also something you should...
-
lancetkenyon replied to the thread Lapua case necks too thick for my rifle.Yes, brass has variations between manufacturers. Lapua usually has .015" necks. But Lapua and Alpha are the top two brass for the .260Rem.
-
lancetkenyon replied to the thread Help with 7mm prc, Berger 190 lrht and RL23.Make sure you have plenty of RL23. Enough for the life of the barrel. Otherwise, switch to N565 or H1000. Stuff you will be able to...
-
lancetkenyon replied to the thread Lapua case necks too thick for my rifle.As Eric H asked, trimmed? Or turned? Sounds like you "turned" them if it was a diameter problem. If virgin brass didn't fit...
