Laelkhunter's latest activity

I have only shot it about 15 times because it rattles my fillings. It was given to me. I got it to 2.5 inch groups, got a deer at 358...

Just wondering how it shoots the way it is? My Weatherby has an upward pressure point and it shoots pretty good. It looks like your...

Unless a mono…..I don't think light in a .338 for Alaskan Moose is a good direction to go! I wouldn't go less than your .225's…..but...

Planning to do a euromount

Big time congrats !! Since it is your first, are you going to have him shoulder mounted or euro?? I didn't see a lot of cape in the...

Just thought I’d share my successful hunt. Got drawn for either sex elk in zone 43 here in Saskatchewan…and scored on the opening day...

No familiarity with that company, but I do ship ammunition daily. Ammo has to go fed ex or ups, as the post office has it listed as...

Mine mostly tightened down where the top ports were at the 1:00 so had to go about 320° around the barrel to get TDC. Took about 30...

I’ve done the same in the past. Couple strokes with a fine file, then check for fit. Lather, Rinse, Repeat until just shy of indexed...

I timed my brakes from Ross myself. Didn't like the washer method. I used a diamond stone and worked the brake down slowly on the stone...

Yes I shot other powder charges

I’ve never tried chasing the lands with factory freebore on wby chamberings. Bullet would barely be in case.

I agree with AZShooter. Weatherby has lots of freebore in their barrel/chamber by design. Messing with the seating depth might not do...

You said you started with a 68 gr load. This is the max load that Nosler lists. Did you try lower powder charges first? If not, you...

Browning A-bolt action. I ordered the Browning when the wsm first came out. Was told it was the first 300 wsm sold around Baltimore yrs...