Laelkhunter's latest activity

Mine mostly tightened down where the top ports were at the 1:00 so had to go about 320° around the barrel to get TDC. Took about 30...

I’ve done the same in the past. Couple strokes with a fine file, then check for fit. Lather, Rinse, Repeat until just shy of indexed...

I timed my brakes from Ross myself. Didn't like the washer method. I used a diamond stone and worked the brake down slowly on the stone...

Yes I shot other powder charges

I’ve never tried chasing the lands with factory freebore on wby chamberings. Bullet would barely be in case.

I agree with AZShooter. Weatherby has lots of freebore in their barrel/chamber by design. Messing with the seating depth might not do...

You said you started with a 68 gr load. This is the max load that Nosler lists. Did you try lower powder charges first? If not, you...

Browning A-bolt action. I ordered the Browning when the wsm first came out. Was told it was the first 300 wsm sold around Baltimore yrs...

Tuesday, opening day in Wyoming, my wife scored on a once-in-forever buck. Camp score was 93 5/8s. Left horn was 57 1/2". Base was 12...

Yes we are north of ya’ll and it’s gonna pass close. We are outside of BR.

Not sure how close you are to me, but it looks like it will pass over my house (Gramercy/Lutcher).

Two factor authentication is the secret I hard to hack password is a given, but with the recent revelations about how much of your...

I have always shot two shots, then a complete cool down for the third. I do have Varget & the various 4350's. Several different depths...

Just doing a deal on a used action. Gave seller my phone number via PM. I then got 2 texts....one from seller and one from someone who...

Set your charge lower than intended and use a manual trickler to finish off each measurement. It’s a little slower process but will...