Kmccord's latest activity

I don't shoot a lot of groups after I finish working up loads. I'll shoot to distance and then take them out hunting. Both of these are...

Yup here's the 550 yard group. I get woke up two to three times a night caretaking. And I work so sometimes I'm a bit off in the mornings.

I'm always trying to correct runout - I'm loading for my nephew's 270 Win at the moment and did a bit of testing yesterday with my Dad's...

I have a Forster die for a 6.5 Creed, it works good, but it will pass some runout at times, not as much as what I am seeing at this...

I'd check your cases after resizing them. If you use an expander ball improperly adjusted/ centered can cause case/ neck runout. As far...

Always trim, chamfer and de-bur.

Forster Dies, have given Me the Least "Run Out" and BEST Accuracy as they Position, the Expander Ball, Near the Top of Case !. And you...

Well, I get run out too. I’ve used RCBS and Redding dies and have found the later to be better in this regard. I’ll have loads run out...

I will, thanks for the invite.

Run by my shop sometime and I'll explain it better. I just hate typing long responses on my phone. 😂

Yes, good idea, but difficult when running up a powder ladder with three shots per powder to see what the barrel likes. However, how...

I'll say it......bullet runout is like no. 5 on my list to affect accuracy. I stopped looking at it years ago after I developed my...

It becomes very frustrating.

What do you believe is the biggest cause for bullet runout, press or dies? I know from experience, I have seen one show very little...

Starting from left. 243 AI with a 108 Elite Hunter 7 Saum with a 175 elite Hunter 7/300NMI with a 195 eol 338 NMI with a 275 MTH