K9TXS's latest activity

Now someone went and came up with turret tags, thinking about trying these out, my ballistic app for the wife's 7mm-08 is off about a...

Diamondback HD 4-14 deadhold bdc recticle

What Vortex scope are you using?

Measure a fired case and see how much you are resizing . To much and you will separate the case .

After reading multiple pages by Mike Bellm and re-reading the other post here, I started to work. I wanted to do the easiest part first...

I was seating the bullets a little deeper after 3 shots working grouping. Grouping never got better with the Hornady bullets and the...

I had kinda same issue with my TC the rim thickness of the brass was just a touch thicker causing minor gap increases in lockckup. I was...

I've been shooting Berger 80 gr VLD with no issues and found these to be very accurate. I saw Hornady had a new bullet out, 80 gr...

I just tried this method with the foil. I measured the foil at .0011 before the test. Inserting the foil and closing the action, the...

Bellm TC"s has tuturiol on headspace on T/C's and firing pin bushing shims if needed.Mike provides a machining service on a barrel. Most...

Here is another interesting read on contender issues. LINK

One of the other replies also mentioned bumping the shoulder. I know at the time I first started working up a load for this, I checked...

I'm confused. If the hammer doesn't fall, is that a lockup issue? IME with the lockup issue, the hammer falls, but doesn't hit the...

I don't think it has a burr since the action always feels so smooth. It never feels like there's a problem when cocking or dry firing...

Sounds to me you are not getting full engagement of your barrels locking lugs. I would first Try bumping the shoulder of your brass back...