-
If you are being asked to change your password, and unsure how to do it, follow these instructions. Click here
Justice1327's latest activity
-
Justice1327 replied to the thread SOLD/EXPIRED Benchmark .257 carbon fiber Sendero blank $525.I didnt realize you had two of these. Got mine from you yesterday. 25 something sherman coming up soon. -
No sir, running 2 now and have 2 more spare mediums waitin in the wings.
-
My most successful test was determining how much neck tension/interference was required to keep a 264WM loaded case with only a primer...
-
Justice1327 replied to the thread New Sherman Wildcat based on a .308 sized bolt face.I tend to agree, but I think they were going for the COAL to fit in SA mag with the 180-190's class bullets. In my 7mm CM it is a...
-
Justice1327 reacted to PNWdude67's post in the thread New Sherman Wildcat based on a .308 sized bolt face with
Like.
Because they can watch that bullet all the way with low recoil and not much muzzle blast from the brake -
Justice1327 replied to the thread New Sherman Wildcat based on a .308 sized bolt face.This is from Derek: Same conditions…. 2MPH Wind uncertainty 20inx20in target. 7SWC 2700fps VS 6MM Dasher 2880 See pics
-
-
Justice1327 reacted to PNWdude67's post in the thread New Sherman Wildcat based on a .308 sized bolt face with Like.
Slow it down so you can watch trace not just see an impact. So now you can send a 190 LRHT at 2500 fps with the same wind hold as a 2700...
-
Justice1327 reacted to Phil Rizzo's post in the thread New Sherman Wildcat based on a .308 sized bolt face with Like.
Alpha brass…..👍
-
Justice1327 reacted to ofdscooby's post in the thread For Sale 6.5 creedmore barrels Bartline defiance with Like.
Quick question to anyone paying attention what's the main reason you wouldn't buy a used barrel. I find myself thinking people are crazy...
-
Justice1327 posted the thread New Sherman Wildcat based on a .308 sized bolt face in Rifles, Bullets, Barrels & Ballistics.Parent case is 6.5x47L — can NOT use Lapua brass…too short of a neck if you do. AI: reduced the taper & 40d shoulder Designed for PRS...
-
-
I would be inspecting how stiff the plunger ejector spring is in the bolt first. It could be your brass too. I had a wildcat based on...
-
Justice1327 replied to the thread Benchmark carbons on sale. Huge selection.Understood, just a preference I have for shooting magnums. I like to have more breach diameter and also a larger muzzle diameter for the...
-
I’m using magpro in my 7wsm. 71 grains 175 grain eldx 3040 fps and 1/2” groups
-
Justice1327 replied to the thread 7mm-08 AI on Small Primer Brass.Many shooters like .243 SRP brass too…can’t find any :-(
-
I went probably 500 on the Ti I had. 2 barrels gave the same result. So so precision and lethargic velocity. Took barrel #2, mated it to...
