-
If you are being asked to change your password, and unsure how to do it, follow these instructions. Click here
just_jon's latest activity
-
just_jon reacted to lancetkenyon's post in the thread Not happy with my painting technique with
Like.
Just did my 25MBK today. Started out like this... I didn't get a photo of the first set of stencils where the black CF would be... -
For protection from galling, corrosion, and seizing due to weathering or chemicals. I use anti-seize on all threads mated with similar...
-
My grandson Bently and I have been hunting hard every morning and evening since season started Saturday a week ago. He had an...
-
My Max LR 300WM trigger was almost 5lbs from factory and could not adjust it lower than 3.75lbs. Now with the carbo lighter shear spring...
-
There is nothing I don’t like about the Xbolt? The trigger spring replacement solves the only issue. Browning continues to lead the...
-
I have not, nor had I ever considered it. I take in boned out meat, and pick it up a week or 2 later. Have 6 boned out deer sitting...
-
just_jon replied to the thread vv 100 series powders on 150-170.The only side by side comparison of 100 vs 500 series I ran was in 300WM with 196HH. Max safe load in my rifle with 165 was 76 grains...
-
OK, Sorry I blew up. The way the post was worded did not seem to relate to a previous post. ;)
-
just_jon reacted to fseaman's post in the thread Can you rechamber a .270 WSM to 6.8 by shortening the shank/chamber end and running a finish reamer? with Like.
There is no "should have" ;) Glad the banter sparked thought. Here is an additional idea if you reload. With a new barrel, you can get...
-
just_jon reacted to FEENIX's post in the thread Can you rechamber a .270 WSM to 6.8 by shortening the shank/chamber end and running a finish reamer? with Like.
Not knowing your "actual" barrel spec, this is best consulted with a competent/reputable gunsmith. Rebarrel with the right twist for...
-
just_jon reacted to bigbuckfarm's post in the thread Can you rechamber a .270 WSM to 6.8 by shortening the shank/chamber end and running a finish reamer? with Like.
Changing the chamber is not going to change the twist rate of the barrel, if it’s a slow twist 270wsm it will be a slow twist...
-
Sorry to hear about fellow members getting scammed on here. After looking at this person’s information they had absolutely NO trader...
-
just_jon replied to the thread 7 saum load data maybe a quickload request.Happy to help, but QL does not have data for Cayuga bullets. I ran data using the 150 Barnes X bullet and the 155 Hammer Hunter. Both...
-
This is a bit of a long one, but I think the community might enjoy hearing the events of this hunt. I was fortunate enough to arrow a...
-
Well... I'm a PA whitetail hunter, so yes. Almost everything is from home. I have gone west for elk once, that was a good experience...