-
If you are being asked to change your password, and unsure how to do it, follow these instructions. Click here
just_jon's latest activity
-
There is nothing I don’t like about the Xbolt? The trigger spring replacement solves the only issue. Browning continues to lead the... -
I have not, nor had I ever considered it. I take in boned out meat, and pick it up a week or 2 later. Have 6 boned out deer sitting...
-
just_jon replied to the thread vv 100 series powders on 150-170.The only side by side comparison of 100 vs 500 series I ran was in 300WM with 196HH. Max safe load in my rifle with 165 was 76 grains...
-
OK, Sorry I blew up. The way the post was worded did not seem to relate to a previous post. ;)
-
just_jon reacted to fseaman's post in the thread Can you rechamber a .270 WSM to 6.8 by shortening the shank/chamber end and running a finish reamer? with
Like.
There is no "should have" ;) Glad the banter sparked thought. Here is an additional idea if you reload. With a new barrel, you can get... -
just_jon reacted to FEENIX's post in the thread Can you rechamber a .270 WSM to 6.8 by shortening the shank/chamber end and running a finish reamer? with Like.
Not knowing your "actual" barrel spec, this is best consulted with a competent/reputable gunsmith. Rebarrel with the right twist for...
-
just_jon reacted to bigbuckfarm's post in the thread Can you rechamber a .270 WSM to 6.8 by shortening the shank/chamber end and running a finish reamer? with Like.
Changing the chamber is not going to change the twist rate of the barrel, if it’s a slow twist 270wsm it will be a slow twist...
-
Sorry to hear about fellow members getting scammed on here. After looking at this person’s information they had absolutely NO trader...
-
just_jon replied to the thread 7 saum load data maybe a quickload request.Happy to help, but QL does not have data for Cayuga bullets. I ran data using the 150 Barnes X bullet and the 155 Hammer Hunter. Both...
-
This is a bit of a long one, but I think the community might enjoy hearing the events of this hunt. I was fortunate enough to arrow a...
-
Well... I'm a PA whitetail hunter, so yes. Almost everything is from home. I have gone west for elk once, that was a good experience...
-
Thinning my collection Excellent shape S&W 657 no dash 41 magnum,6" barrel,hogue grips,lockup is tight and a very accurate handgun...
-
just_jon replied to the thread New from southeast PA.Welcome from SC PA
-
just_jon reacted to Rick Richard's post in the thread How Many Shots? Your Advice Needed. with Like.
Keep shooting as long as he standing. Loos a small amount of meat or loose ALL of it if he runs off and unable to recover.
-
So I was doing some reloaded room organizing today and discovered I have over 100 dies. I guess that just goes along with my 8 presses I...