-
If you are being asked to change your password, and unsure how to do it, follow these instructions. Click here
Jim’s Hunt's latest activity
-
Jim’s Hunt replied to the thread Best Binoculars for the money.Hunting in northwest Colorado 10 to 12 power binos are a must -
Jim’s Hunt replied to the thread Best Binoculars for the money.I am not either eye dominant but maybe slightly more left eye and have used the Vortex Fury and the Leica for NRL Hunter competition and...
-
Jim’s Hunt replied to the thread Best Binoculars for the money.Range finding is the only way to go now days
-
Jim’s Hunt replied to the thread McGuire Ballistics .277 High BC/Heavy hunting bullet.Just need to clean the barrel a little more often. Not a big deal with some of today's products
-
Jim’s Hunt replied to the thread McGuire Ballistics .277 High BC/Heavy hunting bullet.Nosler also have a 165gr Accubond LR
-
Jim’s Hunt replied to the thread McGuire Ballistics .277 High BC/Heavy hunting bullet.270wsm 7.5 twist 175gr sierra TGK 3050 fps.🤮 on 6.8
-
-
I bought some nosler for 280rem, only stuff available at the time. Primer pockets got loose in a few after a little stress in shooting...
-
I'll take federal brass over nosler.... complete trash
-
Nosler is way, way over rated and too expensive. It's ridiculous. Very disappointing entirely.
-
Jim’s Hunt replied to the thread I'm thinking of doing 1-9 barrel for my next 7mm rifle, talk me out of it..My old burnt out 7rum was shooting 160 Accubond at 3350 with Retumbo powder I never had one of them come apart until it hit its target...
-
Jim’s Hunt replied to the thread Is a 270 WSM an adequate elk round?.Tipped over a big cow elk last December with a 270 WSM with a 175gr Sierra TGK going 3050 fps one shot dropped her
-
Jim’s Hunt replied to the thread .277 build using the 170gr. Elite Hunter.I've got a 270 WSM 7.5 twist 24" using MagPro and 175 Sierra THK. Not a screamer at 3050 but did good on an elk last year along with a...
-
Jim’s Hunt replied to the thread Torque wrench reccomendations.I use a Fat Wrench for ring and mount screws in the 15-25 in lb range and a Proto 1/4"dr. Wrench for the heavy torque on rings on pics...
-
Jim’s Hunt replied to the thread 243 win 6.5 stabal.I'm not impressed with 6.5 Stabal or the other Staball powders with accuracy or speed. And they are dirty powder. Builds a carbon ring...
