Hugnot's latest activity

No. What about amount of taper, like how fat is the barrel near the chamber end. The difference between .6 - .55 is only .05. All of...

I am real olde & have acquired huge amounts of "empirical" evidence of accuracy performance indicated by frequent long range hits & tiny...

Most likely the collar is too high, causing the ‘spring’ in the claw to be weak. Have seen this multiple times. Also, if the claw is not...

Money is a reaL big object for me. I am still using my 50 year old RCBS Rockchucker press, olde RCBS scale & powder measure. Lee...

I use Staball 6.5 in .22-250 with 75 ELDM's, 6.5 CM with 123, 130, & 140 ELDM's with outstanding results. I use Staball HD in 6.5-06 &...

I have a MINT 4X matte Leupold handgun scope with a Duplex reticle for sale. Leupold no longer makes handgun scopes and this one is...

Black light makes pee (urine) glow yellow - but this mark does not rub off & is dated & might not smell enough for human nose. Cat pee...

Get down there and smell it… :) I'm guessing a male cat sprayed it… Stinks like pee/musk, and eats/stains metal like acid… It’ll have...

I plan to shoot some of these bullets & will work up form factors and develop loads for 6.5 CM, 6.5-06, & 6.5 PRC.

Looks like some kind of chemical reaction from a spill, accidental or deliberate - like a spill of some corrosive agent like acid or...

Lead styphnate, the stuff inside primers that makes them explode is classified as a low velocity explosive subject to heat, static...

Here is a pic of my .20P on a Ruger M77 MKII, once a .223 Rem, that that has a modified mag box to extend cartridge COAL by .1 inch...

I might rry some drastic modifications to a Lee 6.5 PRC F/L die.

This is a known issue with the prc chambers. They make a reamer to fix it. The chamber is too tight near the base. Sac makes a die that...

Looks like the OP had inadequate headspace but will brass extract easily after firing? My problem with 6.5 PRC brass bought as 1X fired...