Hugnot's latest activity

It is very possible the fawn was hit by a car on road then went into back yard. I will check for blood on road. If the fawn was dragged...

https://www.americanhunter.org/content/video-bear-attacks-deer-in-colorado-family-s-yard/ Second one is narrated on the goofy side...

May sound freaky, but look for contusions and internal damage, may have been hit by a car. My favorite cat was hit by car, and he...

Early this PM, I saw a dead fawn near the fence in our backyard. Real bad smoke in air and busy sched got me involved with other stuff...

I use CCI450's & CCI 41's in SRP 6CM & 6.5 CM with extruded powders like H4350. For ball powders I like Rem 7 1/2's This attachment...

The only issue I have had with small rifle primers has not been ignition but with cup thickness. CCi 450's, CCI 41's or Rem 71/2 seem...

I use Staball HD with 140's, 8 twist. I get over 2850 and real good groups. I also use Staball HD in my 6.5-08, 8 twist. Staball HD -...

Go for the 30mm tube. Assuming glass & lens coatings are equal for a 1" & 30mm tube. Internal lenses will have larger diameters in the...

I see that Hornady has a 174 gr. ELDVT bullet - it might require a 9 twist - Hornady does not have twist info. I was hoping that the...

Golden Rodent powder .20P 11 twist 25.5 gr. 40 VMax, 3650 fps, 24" barrel .204R 11 twist, 27.0 gr. 40 VMax 3700 fps, 26" barrel Saw...

The market is ready for a re-set in value in many areas in the country. I am not sure that a home is a good investment at this time as...

I prefer long brass life & easy bolt cycling with uniformity & accuracy. My loads probably max out under 64K psi. Some might think my...

Sticky bolts occur when the brass and chamber expand under pressure and when the pressure is removed the brass doesn't contract as much...