Recent content by Hcollier

I was 2 yrs 9 months getting a TBAC9 Thumderbeast. Applied thru a family trust first. I had gotten 3 suppressors previously thru the trust, no real issues. The last one was filed electronically about the time Joe Biden took office. I waited 10 mo and called ATF line to check on my suppressor...

I just bought a CZ 600 in the 224 Valkyrie. Nice lightweight rifle. Short action. The better controlled feed from the mag works exceptionally well. Has integral pic rails fore and aft of the action opening. Weather hasn't allowed me to get out and see how it shoots. Most CZ rifles shoot...

It does help. The Forster die barely clears the yoke so the the Hornady seater with the microadjust on top will certainly not clear. I ask Hornady tech service if they could tell me if it would work with the Coax press. He didn't know. You've answered my question Fullbore92. Thanks much.

https://www.hornady.com/reloading/dies/match-grade-dies#!/ This set of dies is what I was looking at. Not too many choices for 7PRC yet.

I talked with their tech dept a few months ago and the tech I talked with was helpful in dealing with the problem I was experiencing, wouldn't record measurement. Found it was the cord I was using from my external battery to the radar unit. The cord wasn't heavy enough to supply the power...

https://www.hornady.com/reloading/dies/match-grade-dies#!/ This set of dies. Not sure if these are a new version or the old. I haven't used Hornady dies for several years.

Can anyone tell me if the Hornady Match grade die set, using the bullet seater with the micro adjust top will clear the yoke on the Forster Co-Ax press? I only ask because the seating die looks excessively tall. Forster's own micro bullet seater barely clears the yoke. I'm looking to buy dies...

I'd like to find a store with a shelf of powders like that today. Haven't seen RL17 for a long time.

If our gov can't executive order or legislate out gun ownership they will work at it from any angle they can. Make components scarce for the ammunition mfgs. and those that reload and eventually (the one worlders and leftists never give up on disarming us) they'll have us with firearms and...

I have puchased with and without a trust. You will have more headaches with a trust. The less people in the trust the better. You have to have updated photos annually and if some members in your trust aren't tech savvy it is time consuming getting photos submitted. The trust is nice for...

My son had a Huskemaw scope a couple years ago. Was having trouble with it and their service department just blew him off. This was after about three attempts to get them to look at the scope. Don't remember the model but wasn't happy with the scope and definitely not with their poor rude service

Amen to the concern for my kids, grandkids and great grandkids. I trust zero of what the CDC and other government agencies spew out.

Here's the tallest flag above ground level in WI, 400' in the air and flag not smaller than the one hanging over bridge. Both are awesome. Great USA display. https://www.carrot-top.com/blog/tallest-flagpole-in-america Here's the tallest above level ground and flag almost as big as this one...

This is an Answer brake. They have been out of business for some time. I have an Answer brake with decelerator pad on a 7 STW on a light weight Rem 700, put on back in the 90s. It tamed the STW to about a 25-06 recoil. The muzzle brake looks like the one shown here in question. Mine is...

I had purchased 100 pcs 243 brass from Peterson 3 or 4 years ago and found the flash holes had burrs and ragged edges. I called and they asked if I could send some pictures or return the box for a replacement. I sent the box back in and they sent me a new box of 100. The flash holes were...