Hard rock's latest activity

Looks like that pre 64 was taken pretty good care of , congrats

PRAYERS INDEED , I know how it feels to loose a close friend and a long time hunting buddy , when a friend thanks you for being his...

Humidity is a bigger issue for powder than temperature in reloading, though one must consider that temperature dramatically effects...

The WTO switch lug is less than a hundred bucks but the smith needs it when headspacing the prefit ,then you are set for the next barrel...

I’ve been handloading for 30+ years but this I need some help with. This is near max powder but my coal is longer than book obviously...

Doesn't exactly look like classic ejector swipe. Use a punch and check to make sure the ejector can be pushed flush or slightly below...

I agree those primers are showing pressure. Or at least appear to be.

THIS^^^^^^^^^

Agree with measuring velocity. I never shoot at the bench without the Oehler 35P in place. It is an independent voice that proves...

Bingo.

Yep, that is over pressured. Start to reduce that load

Is the face of that plunger square? Looks to me like a machining tit left behind in the middle, but your pic is blurry. I have had...

Lower the charge on a couple and see if you get the same swipe. Those will tell u if it's a mechanical issue such as ejector with junk...

At this point unless you have access and knowledge on how to use pressure gage equipment , I would make sure I wasn’t jammed into the...

You may wish to consider running some sample calculations to see the practical effect of the greater BC on wind. I suspect you may find...